At some point, our space may need a thorough flooring renewal. Generally, it is crucial to remove the old floors before installing a new one, especially in the case of tiles. But, it requires much effort, time, and full attention to take out all the tiles.
Here, an epoxy flooring becomes effective as a top coat over the old tiles. It comprises two elements – resin, and hardener which are mixed in an appropriate ratio. The mixture forms a smooth coating on the surface. Additionally, you can add various filling additives and colors as per your personal choice.
So, if you are planning to renovate your space, visit the stores of epoxy flooring in Melbourne, providing a wide variety of options. Choose the best one to match your style and efficiently enhance the look of the place. However, you may be wondering how it is then applied in an effective manner.
So, here, in this article, we are covering all the guidelines that everyone should follow for applying the epoxy resin over the tiles.
Oftentimes, high foot traffic and heavy-weight traffic areas are exposed to some damage. Therefore, it is vital to check the surface of the tiles before installing the epoxy flooring over them. The floor must be dust and dirt free.
If there are some cracks, holes, or crevices, fill them with epoxy fillers. The floor should be leveled up completely. Moisture is the enemy of moist areas such as bathrooms, kitchens, etc. It can prevent the proper sticking of the epoxy resin over the tiles. So, make sure the surface is thoroughly dry. If it is not, allow it to dry for a few days.
Do check for grease, oil, and liquid spills as it will be difficult for the epoxy flooring to set properly. This is essential for tiles installed in garages and kitchen areas as the negligence can lead to the patchy application.
So, sand the tiles to remove the top coating. It is a vital step as several types of chemicals are used during its installation. In addition, glossy finishes are also utilized to enhance the shine. All these elements can cause a hindrance in the bonding of the epoxy coat to the tiles.
Tiles are installed together through the process of grouting. Unfortunately, the grout lines cause difficulty in leveling the surface and making it smooth for applying the epoxy.
To prevent such a situation, fill the grout lines with the fillers. If you install epoxy flooring on rough and uneven surfaces, it will only highlight the defects.
Application of the primer is vital even if the surface is dry. It assures a proper fixing of epoxy flooring over the tiles. The procedure might take hours depending on how big your project is.
Applying the primer helps in enhancing the lifespan of floors by eliminating the chances of cracks. This base coat penetrates deep inside the surface and acts as a fixer for epoxy resin. Use the low-viscous primer as it prevents moisture from seeping inside the flooring.
Now, get ready with all the flooring materials once you fix the tile surface. Mix the two components, resin and hardener in the same ratio. Do check the manufacturer’s instructions mentioned on the container to confirm the proportion.
The appropriate epoxy coat is essential for the perfect setting over the tiles. If you mix too less hardener with the resin, it may lead to incomplete hardening. On the other hand, adding too much of the amount might create pores in the coating.
Use a bucket and drill equipped with a stirrer to thoroughly blend both the components of the epoxy coating. Do remember the pot life of the mixture, once it expires, the resin can not be used anymore.
So, as soon as the epoxy mixture is prepared, start applying it immediately as its pot life is limited. For the application, utilize a dust-free roller. Additionally, ensure the resin is uniformly spread all over the surface.
To uniformly distribute an epoxy resin, firstly, move a roller front to back. Next, drag it left to right. Doing so prevents air bubbles from the epoxy coat and creates a smooth floor surface. Wait for one day after applying the first layer to get it dry appropriately. Ensure the specific room has the proper ventilation.
Now, apply the second layer of coat and allow it to dry for one day. If you want to enhance the aesthetic beauty of your epoxy flooring, sprinkle multicolor chips, little natural stones, etc. to the freshly applied coating.
Moreover, polished concrete in Melbourne is also the preferred flooring idea to add beautiful elements to the space. There are wide ranges of designs, colors, and finishes available to match the style of your place.
Although the epoxy flooring is very durable, it provides low light resistance. But, it can be extremely improved using a transparent layer of sealants.
This effective material not only enhances the light resistance but also protects the surface from turning yellowish. In addition, it brightens up the shine of the floor. Consequently, it promises the longevity of the epoxy flooring by preventing damage.
After the proper application of the top coat, let your epoxy flooring get fixed. However, the time period may extend depending on the room temperature. If still, you are not sure, it will be better to allow it to dry a little further.
Besides this, if you want final confirmation to get sure the epoxy flooring is absolutely ready, let it fix for at least seven days. Here, your floor is ready to get functional.
Indeed, epoxies are the best flooring option to apply over the tiles. Instead of removing the old floor, you can effectively distribute the epoxy resin over the surface. It is a smooth, long-lasting, and affordable building material available with different types of designs. One can customize it as per their preferences.
Adding anti-slip additives is the best option to prevent slip and fall accidents. Besides this, the floor is stain-resistant which is helpful to prevent damage. Thus, you can install appealing epoxy flooring in your space.